field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Animal Technician IIJob ID: 13604Location: El Paso, TXFull/Part Time: Full TimeRegular/Temporary: RegularAbout UTEPThe University of Texas at El Paso (UTEP) is a comprehensive public research university that is increasing access to excellent higher education. We advance discovery of public value and positively impact the health, culture, education, and economy of the community we serve.UTEP is America's leading Hispanic-serving university. Located at the westernmost tip of Texas, where three states and two countries converge along the Rio Grande, 85% of our 25,000 students are Hispanic, and half are the first in their families to go to college. UTEP offers 170 bachelor's, master's and doctoral degree programs at the only open-access, top-tier research university in America.<a href="https://www.utep.edu/research/laboratory-animal-resources-center/The" target="_blank">https://www.utep.edu/research/laboratory-animal-resources-center/The</a> Laboratory Animal Resources Center (LARC) is committed to providing UTEP faculty, staff and students with veterinary and personnel training and expertise in laboratory animal technology and medicine. LARC exists to promote humane animal care and use in support of UTEP's research goals through compliance with the Animal Welfare Act (AWA), Office of Laboratory Animal Welfare (OLAW) and our own IACUC and departmental policies. The LARC advises and educates researchers on animal experimentation issues and provides guidance and review in the protocol writing process, while promoting contemporary best practices for the responsible use of animals. Our goal is provision of quality animal care which is key to obtaining consistent and reliable data.Position InformationHiring Department: Research &amp; Innovation - Laboratory Animal Resources CenterPosting End Date: Open until filled. This posting may close once a sufficient number of qualified applications have been received.Hours: 40 hours per week, standard Monday- Friday 8:00am- 5:00pm, flexibility is required on evenings and weekendsFLSA status: Non-exemptEarliest Start Date: As soon as possible.Salary: $33,000 annually.Required Application Materials:• Resume• Cover Letter (Preferred)• List of three references (Preferred)The primary accountabilities are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code §51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions.Purpose of PositionSummary: Under supervision and with moderate latitude for the use of initiative and independent judgment, provides appropriate housing conditions and husbandry for the animals in support of biomedical research projects, in accordance with departmental Standard Operating Procedures (SOPs) and biosafety and biosecurity guidelines specified in BMBL.Essential FunctionsPerforms animal husbandry duties, including after-hours work to provide food, water, clean cages and bedding; special enrichment items; remove and decontaminate used cages and water bottles; and decontaminate and dispose of animal carcasses and animal associated waste, such as water, food and soiled bedding, and monitor and record temperature and humidity daily.Sanitizes facilities, animal housing units, ancillary animal care equipment, and surgical instruments on a routine basis to ensure rooms and materials are clean and maintain disease free status. This job element includes ensuring proper disposition of waste materials and animal carcasses in accordance with facility standard operating procedures.Participates in infection control procedures, including cage washing, autoclaving and general facility hygiene as well as delivering supplies, equipment and laundry etc. from within and outside the University. This job element includes the ability to operate a cage washer and steam sterilizers.Monitors daily animal health and welfare by observing and recording signs of unusual appearance, behavior, illness, or death in animals; complete and maintain forms as required; administer pre-measured medications according to instructions; obtain routine diagnostic specimens from animals.Keeps accurate and complete records on animal inventories and activities; complies with governmental regulations and University policies regarding health and safety and observes and supports good health and safety practices.Receives, inspects, and houses (quarantine if necessary) incoming animals from off-site colonies or from commercial sources; in the case of colony animals, transfer of animals may be required from one vivarium to another.Ensures that sentinel animals are placed in each rodent housing area and keeps accurate records on the locations and care of the animals.Assists investigators and staff to record information according to instructions such as genealogy, diet, weight, medications and food intake.Assists with restraint, handling and manipulation of various animal species as required for performing animal husbandry duties and/or to assists investigators and staff to perform a variety of research techniques. Restrains, anesthetizes, inoculates, shaves, bathes, clips, and grooms animals in accordance with accepted veterinary practices.Assists investigators and staff in maintaining colonies of laboratory animal populations by initiating breeding when appropriate and as approved.Participates in public holiday and weekend roster duties and works occasional off-hours, weekends and holidays as assigned.Assists with administrative tasks required for documenting and maintaining all federal, state and university activities and records pertaining to the housing and care of laboratory animals during holidays and weekends.Reports any concerns or issues relating to animal welfare to the LARC managers and the Attending Veterinarian.Complies with all federal, state and university regulations and policies governing animal care, and completes online, and classroom training requirements, such as General Laboratory Safety, Biosafety/Bloodborne Pathogens and CITI. Complies with all biosafety and biosecurity practices.Responsible for understanding and utilizing information derived from the National Institutes of Health (NIH) Laboratory Animal Care and Use Manual, Federal Guidelines, University IACUC Policies and Regulations, and the Biosafety Level 3 laboratory manual.Participates in development and implementation of site-specific standard operating procedures (SOP's), in compliance with all federal, state and local regulations and policies.Provides basic technical skills training to principal investigators and lab staff on an as-needed basis.Complies with all State and University policies.Other duties may be assigned.Supervisory Responsibilities: May assist manager with quality assurance verification or general supervision of staff members.QualificationsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.Required Qualifications:Minimum Qualifications: High school diploma or general education degree (GED) and One year of experience, related to the statement of duties and responsibilities (this may include relevant volunteer and unpaid animal experiences); OR an AALAS Certification; OR equivalent combination of education and experience.Preferred Qualifications:Bachelor's degree in a related field.Additional InformationThe physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is required to talk or hear, sit; use hands to feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl and walk, and the ability to stand for long periods of time. The employee must occasionally lift and move up to 35 pounds and repeatedly lift up to 10 pounds throughout the day. Specific vision abilities required by this job include close vision, distance vision and color vision.While performing the duties of this job, the employee may be regularly exposed to fumes or airborne particles. The employee is occasionally exposed to wet or humid conditions; toxic or caustic chemicals; and outdoor weather conditions. The noise level for this work environment ranges from quiet to moderate.Must not be allergic to animal dander or be immuno-deficient. Pregnancy may become a personnel safety factor in some laboratory animal duties. Potential exposure to radiation and biohazards. In addition, incumbent will be required to work safely and effectively in non-containment and the animal biosafety level 2 containment laboratories.The University of Texas at El Paso is an Equal Opportunity/Affirmative Action employer. The University does not discriminate on the basis of race, color, national origin, sex, religion, age, disability, genetic information, veteran status, sexual orientation, or gender identity in employment or the provision of services in accordance with state and federal law. Discrimination on the basis of sex includes an employee's or prospective employee's right to be free from sexual harassment under Title IX of the Higher Education Amendments of 1972. Inquiries—including the filing of a Formal Complaint or reporting an incident—about the application of Title IX may be referred to the Title IX Coordinator, who can be reached by phone at (915) 747-8358, by email at <a href="mailto:titleix@utep.edu" target="_blank">mailto:titleix@utep.edu</a>, or by mail at 500 W. University Ave., El Paso, TX, Kelly Hall, Room 312.For accommodation information for employees and applicants with disabilities, please contact UTEP's Equal Opportunity Office at <a href="mailto:eoaa@utep.edu.To" target="_blank">mailto:eoaa@utep.edu.To</a> apply, visit <a href="https://apptrkr.com/6297870jeid-3da970f09ca0b348af40b0126221688f" target="_blank">https://apptrkr.com/6297870jeid-3da970f09ca0b348af40b0126221688f</a>

The University of Texas at El Paso

Animal Technician II

Engineer II - Aerospace Center (Temp)Job ID: 13606Location: El Paso, TXFull/Part Time: Full TimeRegular/Temporary: RegularAbout UTEP<a href="https://www.utep.edu/UTEP" target="_blank">https://www.utep.edu/UTEP</a> is a comprehensive public research university that is increasing access to excellent higher education. We advance discovery of public value and positively impact the health, culture, education, and economy of the community we serve.The University of Texas at El Paso is America's leading Hispanic-serving university. Located at the westernmost tip of Texas, where three states and two countries converge along the Rio Grande, 84% of our 24,000 students are Hispanic, and more than half are the first in their families to go to college. UTEP offers 172 bachelor's, master's and doctoral degree programs at the only open-access, top-tier research university in America.<a href="https://www.utep.edu/engineering/The" target="_blank">https://www.utep.edu/engineering/The</a> College of Engineering at the University of Texas at El Paso (UTEP) is dedicated to fostering innovation, education, and research in engineering and technology. With a mission to prepare the next generation of engineers, the college offers a wide range of undergraduate, graduate, and doctoral programs across various disciplines. Its diverse faculty and cutting-edge research facilities drive discoveries and solutions to real-world challenges, contributing to advancements in science, technology, and the overall growth of the Border Region. UTEP's College of Engineering is committed to academic excellence, community engagement, and shaping the future of engineering.<a href="https://www.utep.edu/aerospace/The" target="_blank">https://www.utep.edu/aerospace/The</a> Aerospace Center at The University of Texas at El Paso (UTEP) — we serve as a nexus for innovation, forging strategic partnerships across a dynamic ecosystem (a New Frontier Ecosystem!) of government agencies, industry leaders, small businesses, venture studios, venture capital firms, other research centers, and national laboratories. By translating and integrating cutting-edge research with real-world applications, our partnerships accelerate breakthroughs, cultivate entrepreneurial ventures, and drive the future of aerospace technology.Position InformationHiring Department: <a href="https://www.utep.edu/aerospace/Posting" target="_blank">https://www.utep.edu/aerospace/Posting</a> End Date: Open until filled.Hours: 40 hours per week, standard Monday- Friday 8:00am- 5:00pm, flexibility is required on evenings and weekendsFLSA status: ExemptEarliest Start Date: As soon as possible.Salary: $74,244 annually.Required Application Materials:• Resume• Cover Letter (prefered)• List of three references (optional)Note: This position is subject to availability of funds.The primary accountabilities are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code §51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions.Purpose of PositionSummary: Performs highly complex (journey-level) engineering, research, or oversight work. Provides engineering support on systems, system elements, interfacing systems, components, devices, and processes.Note: The primary accountabilities below are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed below. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code §51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions.Statement of Duties and Responsibilities:Develops strategic and implementation plans.Contributes to system architecture and design including software, hardware, communications and interface requirements.Provides definition, trade-off and design support.Reviews, evaluates and analyzes designs.Prepares, reviews and evaluates documentation specifications, test plans and procedures.Performs analysis to define, analyze and allocate requirements.Supports test programs and analyses testing.Operates small UAS and related systems in support of tests.Performs analysis of requirements and components and performs audits to ensure intended functionality and performance is achieved.Conducts installation and maintenance of systems/equipment, and provides associated training to customer personnel.Diagnoses, isolates and correct problems to component level to restore system's functions.Formulates conceptual design of aeronautical or aerospace products or systems to meet customer requirements.Directs and coordinates activities of engineering or technical personnel designing, fabricating, modifying, or testing of aircraft or aerospace products.Directs and coordinates activities of engineering or technical personnel designing, fabricating, modifying, or testing of aircraft or aerospace products.Plans and conducts experimental, environmental, operational and stress tests on models and prototypes of aircraft and aerospace systems and equipment.Writes technical reports and other documentation such as handbooks and bulletins, for use by engineering staff, management, and customers.Directs research and development programs and/or projects.Reads and interpret blueprints, technical drawings, schematics, and computer-generated reports.Confers with engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information.Researches and analyzes customer design proposals, specifications, manuals, and other data to evaluate the feasibility, cost, and maintenance requirements of designs or applications.Specifies system components or directs modification of products to ensure conformance with engineering design and performance specifications.Researches, designs, evaluates, installs, operates, and maintains mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles.Oversees installation, operation, maintenance, and repair to ensure that machines and equipment are installed and functioning according to specifications.Designs electronic components, software, products or systems for commercial, industrial, medical, military, or scientific applications.Provides technical support and instruction to staff or customers regarding equipment standards, assisting with specific, difficult in-service engineering.Analyzes system requirements, capacity, cost, and customer needs to determine feasibility of project and develop system plan.Confers with engineers, customers, vendors or others to discuss existing and potential engineering projects or products.Reviews and evaluate work of others, inside and outside the organization, to ensure effectiveness, technical adequacy and compatibility in the resolution of complex engineering problems.Prepares documentation containing information such as confidential descriptions and specifications of proprietary hardware and software, product development and introduction schedules, product costs, and information about product performance weaknesses.Knowledge of all Microsoft Office software and able to learn and use institutional software systems.Maintains software using git version control system.Maintains task and issue documentation for project tracking.Complies with all State and University policies.Other duties may be assigned.Travel is required.Location: Position reports to on campus and/or off campus facilities (Tornillo, TX and field sites)Supervisory Responsibilities No supervisory responsibilities.QualificationsQualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Required Qualifications:Education: Bachelor's degree in Engineering, Science, or related field.andExperience: Eight years of experience, related to the statement of duties and responsibilities; or equivalent combination of education and experience.Preferred Qualifications: Broad knowledge of aerospace industry practices, standards and technology areas. FAA part 107 certificate and experience operating small UAS. Experience implementing complex software-driven systems using message passing architectures.Additional InformationPhysical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is frequently required to sit and talk or hear. The employee is occasionally required to stand; walk and use hands to feel. The employee must occasionally lift and/or move up to 30 pounds. The employee must be medically qualified to operate small UAS as remote pilot in command and visual observer.Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.,In keeping with its access, excellence and impact mission, The University of Texas at El Paso is committed to an open, diverse, and inclusive learning and working environment that honors the talents, respects the differences, and nurtures the growth and development of all. We seek to attract faculty and staff who share our commitment.The University of Texas at El Paso is an Equal Opportunity/Affirmative Action employer. The University does not discriminate on the basis of race, color, national origin, sex, religion, age, disability, genetic information, veteran status, sexual orientation, or gender identity in employment or the provision of services in accordance with state and federal law. Discrimination on the basis of sex includes an employee's or prospective employee's right to be free from sexual harassment under Title IX of the Higher Education Amendments of 1972. Inquiries—including the filing of a Formal Complaint or reporting an incident—about the application of Title IX may be referred to the Title IX Coordinator, who can be reached by phone at (915) 747-8358, by email at <a href="mailto:titleix@utep.edu" target="_blank">mailto:titleix@utep.edu</a>, or by mail at 500 W. University Ave., El Paso, TX, Kelly Hall, Room 312.For accommodation information for employees and applicants with disabilities, please contact UTEP's Equal Opportunity Office at <a href="mailto:eoaa@utep.edu.To" target="_blank">mailto:eoaa@utep.edu.To</a> apply, visit <a href="https://apptrkr.com/6297874jeid-22cd3a25e7170745833d3c4429e812fb" target="_blank">https://apptrkr.com/6297874jeid-22cd3a25e7170745833d3c4429e812fb</a>

Engineer II - Aerospace Center (Temp)

Open Rank in Quantum and Energy ScienceThe Department of Physics at The University of Texas at El Paso (UTEP) is seeking applications for open-rank positions in Quantum and Energy Science, broadly defined. Research areas include but are not limited to quantum computing, quantum information, quantum communication, quantum materials, quantum sensing, and quantum optics and quantum energy. Applicants in all areas of experimental and theoretical quantum science are encouraged to apply. These positions are created under the University of Texas System Regents' Research Excellence Program. Faculty hired into the rank of tenured full professor will be given the additional honorific title of Regents' Distinguished Research Professor. Faculty hired at a lower rank will earn this title upon promotion to full professor with tenure.Job Requirements:Applicants should hold a Ph.D. in Physics and have demonstrated long-term focus to physics research, possess postdoctoral experience, have a strong record of research accomplishments, and possess strong verbal and written communication skills. The successful senior-level candidates will be national or international leaders in their respective field, have demonstrated attention to promoting STEM education and research opportunities to pre-college, college and graduate students, have already established and maintained an independent externally funded research program that can be expanded upon, at UTEP, through collaborations with existing researchers in the department and by collaborating with other professors hired under this program. They must be able to teach at both undergraduate and graduate levels, perform service to the Department, College and University, and engage in outreach activities. The new hires will be core members of faculty of the Physics Graduate Program and instrumental in expanding team-based research in the Department of Physics. The university has committed to support of these positions with generous start-up funds.Additional Information:In keeping with its access, excellence, and impact mission, The University of Texas at El Paso is committed to an open, diverse, and inclusive learning and working environment that honors the talents, respects the differences, and nurtures the growth and development of all. We seek to attract faculty and staff who share our commitment.The University does not discriminate on the basis of race, color, national origin, sex, religion, age, disability, genetic information, veteran status, sexual orientation, or gender identity in employment or the provision of services in accordance with state and federal law. Discrimination on the basis of sex includes an employee's or prospective employee's right to be free from sexual harassment under Title IX of the Higher Education Amendments of 1972. Inquiries-including the filing of a Formal Complaint or reporting an incident-about the application of Title IX may be referred to the Title IX Coordinator, who can be reached by phone at (915) 747-8358, by email at <a href="mailto:titleix@utep.edu" target="_blank">mailto:titleix@utep.edu</a>, or by mail at 500 W. University Ave., El Paso, TX, Kelly Hall, Room 312.For accommodation information for employees and applicants with disabilities, please contact UTEP's Equal Opportunity Office at <a href="mailto:eoaa@utep.edu.To" target="_blank">mailto:eoaa@utep.edu.To</a> apply, visit <a href="https://apptrkr.com/6300311jeid-a4da4efe7372514f8521760690be178f" target="_blank">https://apptrkr.com/6300311jeid-a4da4efe7372514f8521760690be178f</a>

Open Rank in Quantum and Energy Science

Commitment to MissionThis job carries with it the obligation to uphold the Mission of Lone Star College (LSC) in carrying out the duties of the position. A commitment to positive interpersonal behaviors, professional communication, integrity, leadership, stewardship, respect and accountability to LSC students and employees is essential.Cultural Beliefs<ul><li>One LSC</li><li>Student Focused</li><li>Own It</li><li>Foster Belonging</li><li>Cultivate Community</li><li>Choose Learning</li></ul>The Chronicle of Higher Education's "Great Colleges to Work For®" is designed to recognize colleges that have been successful in creating great workplaces and to further research and understanding of the factors, dynamics and influences that have the most impact on organizational culture at higher education institutions.Lone Star College has been recognized in multiple categories.Campus Marketing StatementLone Star College-CyFairLone Star College offers high-quality, low-cost academic transfer and career training education to 80,000+ students each semester. LSC has been named a 2023 Great Colleges to Work For® institution by the Chronicle of Higher Education. LSC consists of eight colleges, seven centers, eight Workforce Centers of Excellence and Lone Star Corporate College.Located in suburban northwest Houston in the heart of the CyFair Community, the college provides a full range of offerings including unique programs in fire science technology, logistics management and sonography. Since opening our award winning campus in 2003, the college has experienced record growth and supports an exciting learning environment that brings together state-of-the-art technology and active, collaborative learning.Location address is 9191 Barker Cypress Road, Cypress, TX 77433.Job DescriptionPURPOSE AND SCOPE:Under general supervision, the Specialist III, Honors and International Education performs advanced and standard administrative duties. Generally reports to a Manager-level position and provides specialized daily operations management for the HIE campus office (Honors and/or Global Scholars). Activities include specialized support for director, students, and faculty at the campus-level, as well as collaborating with the system-wide HIE staff team and proactively contributing to a service-oriented environment.ESSENTIAL JOB FUNCTIONS:<ul><li>Serves as first contact in the HIE campus center for all students, as well as internal and external visitors; assists students by handling their requests and providing routine information</li><li>Scans mail, arranges in priority order, and distributes to one or more managers</li><li>Screens calls for managers and responds to routine questions; answers all inbound calls and trouble shoots HIE Center to resolve student inquiries regarding the admissions process, advising info, registration requirements, and business functions, as well as general inquires</li><li>Performs accurate data entry using custom SharePoint database modules (application, roster, scholarship, budget, travel and conference), including adding/dropping new students in the system and correctly registering their classes and campus-level processing and tracking of program applications and scholarships; runs regular reports to ensure accuracy</li><li>Schedules tentative appointments for approval by manager, makes routine travel arrangements; may schedule group meetings and assist with set-up; maintains campus events and SharePoint project calendars</li><li>Collaborates with college staff and administrators to address and provide a wide variety of assistance to students to promote recruitment, admissions and enrollment</li><li>Maintains HIE space, including requesting equipment repair, as well as stocking, organizing and maintaining supplies; Responsible for safety and maintenance of own equipment; may control or disburse petty cash or monitor expenses charged against department accounts</li><li>Promotes communication, program awareness and opportunities that the division provides</li><li>Assists with the preparation of events including catalogs/flyers, promotional items, job aides, maps, room notices, etc. and may attend events to assist and/or inform the students and the community of LSC programs</li><li>Coordinates with other administrative, maintenance, or clerical employees in own department or throughout the college to accomplish such routine activities as ordering supplies, obtaining approvals, and collecting standard forms</li><li>May collect data and perform basic mathematical calculations, including assisting with budget documents and records</li><li>Contacts prospective students during peak registration and before each enrollment period starts to provide assistance with the enrollment process through phone calls or emails and includes registering students for classes</li><li>Assists in scheduling and inputting classes and/or preparing instructor classroom and project materials</li><li>With supervisor’s approval, responsible for supporting the System-wide HIE staff member working group for collaborative Professional Development, cross-functionality, and general coverage</li><li>Responsible for other reasonable, related duties as assigned</li></ul>KNOWLEDGE, SKILLS AND ABILITIES:<ul><li>Strong oral and written communication skills</li><li>Excellent customer service skills</li><li>Strong attention to detail</li><li>Proficiency with common office software (i.e. Outlook, Microsoft Word, Excel, PowerPoint). Ability to learn and use SharePoint.</li><li>Ability to use and learn department database to enter, track, and maintain student and financial data, as well as budget modules. Some interpretation of information required.</li><li>Ability to work on multiple projects</li><li>Ability to multi-task and prioritize work assignments</li><li>Ability to maintain confidentiality</li></ul>PHYSICAL ABILITIES:The work is sedentary. Typically, the employee sits comfortably to do the work. However, there may be some walking; standing; bending; carrying of light items, such as papers, books, or small parts; or driving an automobile. No special physical demands are required to perform the work.WORK SCHEDULE AND CONDITIONS: <ul><li>Equipment used includes, PC workstation running on a LAN in a Microsoft Windows environment, calculator, phone and other general office equipment</li><li>Interface with internal and external contacts as needed to carry out the functions of the position</li><li>Work is performed in a climate-controlled office with minimal exposure to safety hazards</li></ul>REQUIRED QUALIFICATIONS:<ul><li>High School Diploma or GED and at least 3 years of experience, or an equivalent combination of education and experience</li></ul>SalaryHiring salary range is $33,540.00 to $38,571.00Lone Star College provides a hiring salary range for all posted full-time non-faculty positions. Where your salary offer would fall in that range is determined by your related experience and education. Should you receive an offer of employment from Lone Star College, the resume submitted in the application process will be utilized to calculate your salary offer. The information outlined below will provide the Office of Human Resources everything needed to determine an accurate starting salary.Your resume should provide a complete picture of your work experience. The resume should include the following information for each position listed:<ul><li>Length of time (specific months and years) of employment</li><li>If the position was full time or part time</li><li>If the position was paid or unpaid</li><li>Level of degree completed including date earned.</li><li>Unofficial transcript for highest earned degree</li></ul>Additionally, any certifications listed as required or preferred in the Lone Star College job description should be included in the resume submitted.Benefits Marketing StatementBy joining our top-notch institution, you will enjoy being a part of an organization that offers a supportive, collegial work environment and excellent work/life balance. This includes a full comprehensive and competitive benefits package, a generous number of paid holidays and vacation days, wellness programs, tuition waiver, professional development opportunities and more.Special InstructionsGo to the Job Search page, click on ‘My Activities’ at the top of the page. Under My Cover Letters and Attachments you will click on ‘Add Attachment.’ Please be sure to put the Job ID# in the title once you name your file for cover letters only, unless you attached your cover letter with your resume.If you are applying for an Instructional position (i.e. Faculty, Adjunct Faculty, Instructor), please ensure you include the following to be considered: Resume/CV, Cover Letter, Teaching Philosophy, and unofficial transcripts. You must limit your file name for any attachment to 40 characters or less.How to ApplyALL APPLICANTS MUST APPLY ONLINE ONLYWe will not accept application material received via fax, email, mail, or hand delivered.Postings for part-time and adjunct positions are active for the academic year. By selecting the option to receive notifications on your profile, you will begin receiving electronic communication regarding new opportunities with Lone Star College (LSC).If selected for an interview, a recruiter will contact you by phone, or email to schedule an interview.Lone Star College participates in the E-Verify program, under which Lone Star College provides the federal government with information from each new employee's Form I-9 to confirm that the employee is authorized to work in the United States.More information on the E-Verify program is available at <a href="http://www.dhs.gov/E-Verify" target="_blank">www.dhs.gov/E-Verify</a>.Lone Star College is an EEO Employer. All positions are subject to a criminal background check.

Specialist III, Honors and International Education

Commitment to MissionThis job carries with it the obligation to uphold the Mission of Lone Star College (LSC) in carrying out the duties of the position. A commitment to positive interpersonal behaviors, professional communication, integrity, leadership, stewardship, respect and accountability to LSC students and employees is essential.Cultural Beliefs<ul><li>One LSC</li><li>Student Focused</li><li>Own It</li><li>Foster Belonging</li><li>Cultivate Community</li><li>Choose Learning</li></ul>The Chronicle of Higher Education's "Great Colleges to Work For®" is designed to recognize colleges that have been successful in creating great workplaces and to further research and understanding of the factors, dynamics and influences that have the most impact on organizational culture at higher education institutions.Lone Star College has been recognized in multiple categories.Campus Marketing StatementLone Star College-Houston North FairbanksLone Star College offers high-quality, low-cost academic transfer and career training education to 80,000+ students each semester. LSC has been named a 2023 Great Colleges to Work For® institution by the Chronicle of Higher Education. LSC consists of eight colleges, seven centers, eight Workforce Centers of Excellence and Lone Star Corporate College.LSC-Houston North Fairbanks is located at Highway 290 and West Little York Road, near the Sam Houston Tollway. The Fairbanks location provides a variety of services to students including advising, registration, counseling, and tutoring. Academic programs include basic transfer courses, developmental studies, and English for Speakers of Other Languages.Location address is 14955 Northwest Freeway, Houston, TX 77040.Job DescriptionPURPOSE AND SCOPE:Tutors and instructs students and community members who need learning assistance in assigned discipline(s) and study skills. Primary responsibilities include providing tutoring and related services, and providing and atmosphere that is conducive to and encourages learning. Responsible for the general areas of student academic support, institutional service, and professional development.ESSENTIAL JOB FUNCTIONS:<ul><li>Effectively delivers tutoring services to students at scheduled times (may be individual or group sessions). Posts and maintains a weekly schedule of available hours for student appointments</li><li>Assists students with the development of study skills necessary for post-secondary education</li><li>Keeps regular and accurate records of tutoring sessions</li><li>Monitors and reviews student work. Modifies and personalizes tutoring strategies to accommodate the different learning styles and needs</li><li>Facilitates the learning process by encouraging students to take responsibility for their progress</li><li>Interacts with LSC staff and/or faculty to obtain any necessary course syllabi or materials, and to develop tutoring materials in support of the course</li><li>Delivers feedback as appropriate to staff and/or faculty regarding student progress</li><li>Continues professional education through research and review of relevant material relating to the assigned subject matter</li><li>May assist with additional duties as needed, for example, covering the Courtesy Counter, answering phones, organizing materials, checking out resources, and performing other duties as assigned</li><li>Completes and submits required documents in an accurate and timely manner</li><li>Actively participates in departmental meetings as required</li><li>Responsible for other reasonable related duties as assigned</li></ul>KNOWLEDGE, SKILLS, AND ABILITIES:<ul><li>Demonstrated proficiency in assigned discipline's subject matter</li><li>Excellent interpersonal and communication skills, both oral and written</li><li>Commitment to quality service to students</li><li>Ability and commitment to work collaboratively</li><li>Ability to work independently with little direct or continuous supervision</li></ul>PHYSICAL ABILITIES:The work is sedentary. Typically, the employee sits comfortably to do the work. However, there may be some walking; standing; bending; carrying of light items, such as papers, books, or small parts; or driving an automobile. No special physical demands are required to perform the work.WORK SCHEDULE AND CONDITIONS: <ul><li>Equipment used includes, PC workstation running on a LAN in a Microsoft Windows environment, calculator, phone and other general office equipment</li><li>Interface with internal and external contacts as needed to carry out the functions of the position</li><li>Work is performed in a climate-controlled office with minimal exposure to safety hazards</li></ul>REQUIRED QUALIFICATIONS:<ul><li>Transcripts and/or a proficiency test may be required</li><li>Bachelor's degree or higher</li></ul>SalaryHourly Pay Rate is $20.16Benefits Marketing StatementBy joining our top-notch institution, you will enjoy being a part of an organization that offers a supportive, collegial work environment, excellent work/life balance, tuition waiver, participation in a tax deferred retirement plan and more.Special InstructionsGo to the Job Search page, click on `My Activities¿ at the top of the page. Under My Cover Letters and Attachments you will click on `Add Attachment.¿ Please be sure to put the Job ID# in the title once you name your file for cover letters only, unless you attached your cover letter with your resume.If you are applying for an Instructional position (i.e. Faculty, Adjunct Faculty, Instructor), please ensure you include the following to be considered: Resume/CV, Cover Letter, Teaching Philosophy, and unofficial transcripts.You must limit your file name for any attachment to 40 characters or less.PLEASE NOTE - although location on posting is listed as Houston North Fairbanks, hire could be assigned and work at any/all of the four Houston North locations, as needed.&nbsp; Locations include Houston North&nbsp;Greenspoint, Houston North Victory, Houston North Fairbanks and&nbsp;Houston North Fallbrook.How to ApplyALL APPLICANTS MUST APPLY ONLINE ONLYWe will not accept application material received via fax, email, mail, or hand delivered.Postings for part-time and adjunct positions are active for the academic year. By selecting the option to receive notifications on your profile, you will begin receiving electronic communication regarding new opportunities with Lone Star College (LSC).If selected for an interview, a recruiter will contact you by phone, or email to schedule an interview.Lone Star College participates in the E-Verify program, under which Lone Star College provides the federal government with information from each new employee's Form I-9 to confirm that the employee is authorized to work in the United States.More information on the E-Verify program is available at <a href="http://www.dhs.gov/E-Verify" target="_blank">www.dhs.gov/E-Verify</a>.Lone Star College is an EEO Employer. All positions are subject to a criminal background check.

Part-Time Tutor, English-Level 1 NC/BACH

Commitment to MissionThis job carries with it the obligation to uphold the Mission of Lone Star College (LSC) in carrying out the duties of the position. A commitment to positive interpersonal behaviors, professional communication, integrity, leadership, stewardship, respect and accountability to LSC students and employees is essential.Cultural Beliefs<ul><li>One LSC</li><li>Student Focused</li><li>Own It</li><li>Foster Belonging</li><li>Cultivate Community</li><li>Choose Learning</li></ul>The Chronicle of Higher Education's "Great Colleges to Work For®" is designed to recognize colleges that have been successful in creating great workplaces and to further research and understanding of the factors, dynamics and influences that have the most impact on organizational culture at higher education institutions.Lone Star College has been recognized in multiple categories.Qualities of ExcellenceAs faculty members of Lone Star College, we strive to create a nation of world citizenry in our students. In that pursuit, we model ways of thinking and being that incorporate diversity, equality, and equity. Our culture, then, requires the possession of transcendent qualities that, while immeasurable, are evident in global citizens. We are compassionate with our students, colleagues, and ourselves. We are innovative in the pursuit of learning. Ultimately, we create a culture where learning thrives, people are safe, and we mirror the qualities of world citizenry.Lone Star College faculty are dedicated to four qualities of excellence:<ul><li>Student Invested</li><li>Content Expert</li><li>Pedagogically Excellent</li><li>Institutionally Dedicated</li></ul>Campus Marketing StatementLone Star College-East Aldine CenterLone Star College offers high-quality, low-cost academic transfer and career training education to 80,000+ students each semester. LSC has been named a 2023 Great Colleges to Work For® institution by the Chronicle of Higher Education. LSC consists of eight colleges, seven centers, eight Workforce Centers of Excellence and Lone Star Corporate College.The LSC-East Aldine Center, part of the larger East Aldine Town Center project, is a comprehensive educational campus that provides a mix of academic college transfer courses as well as workforce training programs in high-demand fields such as computer networking, welding, accounting and more. The center will also be home to the Aldine ISD Early College High School.Location address is 2430 Aldine Mail Route Rd., Houston, TX 77039.Job DescriptionPURPOSE AND SCOPE:It is the responsibility of the teaching faculty to provide the learning activities and support that will lead to the achievement of the course objectives and contribute to the educational environment of the college and the community. &nbsp;Primary responsibilities are to plan, develop and teach courses within the curriculum in a manner that facilitates student learning.ESSENTIAL JOB FUNCTIONS:<ul><li>Teaches courses in Inspection Technology at a variety of times and locations in response to institutional needs, making continuous efforts to improve the quality of instruction by reviewing and utilizing innovative methodologies, techniques, and delivery methods</li><li>Develops and uses a syllabus for each course or laboratory within college and departmental guidelines</li><li>Plans, develops and uses a variety of teaching methods and materials that assist students in meeting course objectives and which are appropriate for students with differing educational and experiential backgrounds and learning styles</li><li>Evaluates students to measure their progress toward achievement of stated course objectives and informs them in a timely manner of their progress in the course</li><li>Submits required college reports and forms</li><li>Reviews, evaluates, and recommends student learning materials</li><li>Maintains professional relationships with students, colleagues and the community</li><li>Provide access to students through posted office hours, electronic communication and other appropriate methods</li><li>Responsible for professional development and institutional service as determined in consultation with the Dean</li><li>Responsible for recruiting and advising students in their area</li><li>Responsible for managing their classrooms and labs, including assuring lab facilities meet state requirements</li><li>Responsible for assisting with student job placement</li><li>Works directly with certification agencies to ensure alignment and high level of program and student success</li><li>Responsible for other reasonable related duties as assigned</li></ul>KNOWLEDGE, SKILLS, AND ABILITIES:<ul><li>Mastery of Inspection Technology course content</li><li>Ability to set up commonly used welding equipment</li><li>Demonstrated leadership skills / style that emphasizes collaboration, teamwork, and facilitation</li><li>Excellent oral and written communication and interpersonal skills</li><li>Ability to set up commonly used Inspection equipment</li><li>Ability to appreciate alternative viewpoints; ability to work effectively with a wide variety of people</li><li>Demonstrates interest in interdisciplinary teaching, service learning, learning technologies, course development, and adult learning methodologies including collaborative learning, learning communities and distance learning</li><li>Commitment to academic excellence, exceptional service and providing a dynamic climate for life-long learning</li><li>Demonstrated ability to develop and implement instructional approaches such as service learning/civic engagement, learning communities, and the effective use of technology</li><li>Ability to use effective strategies to engage students in their learning</li><li>Takes leadership within the department and engages with employers within the industry</li></ul>PHYSICAL ABILITIES:The work requires some physical exertion, such as long periods of standing.&nbsp; The work may require specific, but common, physical characteristics and abilities, such as above average agility and dexterity.WORK SCHEDULE AND CONDITIONS:<ul><li>Equipment used includes, PC workstation running on a LAN in a Microsoft Windows environment, calculator, phone and other general office equipment, as well as all metal cutting equipment, hand grinding equipment, and other commonly used welding equipment</li><li>Interface with internal and external contacts as needed to carry out the functions of the position</li><li>Work is performed in a climate-controlled office with minimal exposure to safety hazards, as well as in lab environments with exposure to safety hazards typical with that in the Welding industry.&nbsp; Safety precautions must be observed at all times</li></ul>REQUIRED QUALIFICATIONS:<ul><li>Associate's or Bachelor's degree in metals science (metallurgy, composite science, etc.), or welding technology, agriculture mechanics, industrial education, industrial arts, or industrial technology and 3 years related work experience in the field</li></ul>PREFFERED QUALIFICATIONS:<ul><li>ASNT Level II or III certification in one or more of the following nondestructive testing methods: UT, PAUT, RT, MT, PT, ET, and/or an AWS CWI. ISO 9712 or other Inspection certifications will be considered</li></ul>SalaryCommensurate with education, experience and qualifications.Your salary offer would fall in that range is determined by your related experience and education. Should you receive an offer of employment from Lone Star College, the resume submitted in the application process will be utilized to calculate your salary offer. The information outlined below will provide the Office of Human Resources everything needed to determine an accurate starting salary.Your resume should provide a complete picture of your work experience. The resume should include the following information for each position listed:<ul><li>Length of time (specific months and years) of employment</li><li>If the position was full time or part time</li><li>If the position was paid or unpaid</li><li>Level of degree completed including date earned.</li><li>Unofficial transcript for highest earned degree</li></ul>Additionally, any certifications listed as required or preferred in the Lone Star College job description should be included in the resume submitted.Benefits Marketing StatementBy joining our top-notch institution, you will enjoy being a part of an organization that offers a supportive, collegial work environment and excellent work/life balance. This includes a full comprehensive and competitive benefits package, wellness programs, professional development opportunities, sabbatical opportunities and more.Special InstructionsGo to the Job Search page, click on ‘My Activities’ at the top of the page. Under My Cover Letters and Attachments you will click on ‘Add Attachment.’ Please be sure to put the Job ID# in the title once you name your file for cover letters only, unless you attached your cover letter with your resume.If you are applying for an Instructional position (i.e. Faculty, Adjunct Faculty, Instructor), please ensure you include the following to be considered: Resume/CV, Cover Letter, Teaching Philosophy, and unofficial transcripts. You must limit your file name for any attachment to 40 characters or less.How to ApplyALL APPLICANTS MUST APPLY ONLINE ONLYWe will not accept application material received via fax, email, mail, or hand delivered.Postings for part-time and adjunct positions are active for the academic year. By selecting the option to receive notifications on your profile, you will begin receiving electronic communication regarding new opportunities with Lone Star College (LSC).If selected for an interview, a recruiter will contact you by phone, or email to schedule an interview.Lone Star College participates in the E-Verify program, under which Lone Star College provides the federal government with information from each new employee's Form I-9 to confirm that the employee is authorized to work in the United States.More information on the E-Verify program is available at <a href="http://www.dhs.gov/E-Verify" target="_blank">www.dhs.gov/E-Verify</a>.Lone Star College is an EEO Employer. All positions are subject to a criminal background check.

Workforce Skilled Instructor, Inspection Technology

At SCAD, service design sits at the intersection of strategy, innovation, and human-centered thinking. As a professor of service design, you will join a collaborative, forward-thinking environment where you’ll guide students to become design leaders who create meaningful, impactful service experiences.You’ll support both graduate and undergraduate students as they think systemically about how services are designed, delivered, and experienced—leading them through real-world challenges across industries like healthcare, retail, finance, and government. With access to outstanding resources and interdisciplinary collaboration, you’ll help shape the next generation of changemakers.In this position, you will support academic assessment and institutional effectiveness efforts by contributing to the university’s mission, vision, values, and strategic goals. You will attend on-ground and virtual activities such as admission events, faculty councils, exhibitions, and more. Among other duties, you may participate in curriculum assessment and development meetings, accreditation support, institutional effectiveness meetings, or other publicity assignments. The person in this role will adhere to all university policies.  &nbsp; &nbsp;Minimum qualifications:Terminal degree or its equivalent in the discipline or in a relevant fieldExperience in service design fieldTravel required:&nbsp;Less than 10%Work hours:&nbsp;The university work week is Sunday through Saturday. Most offices are open Monday through Friday from 8:30 a.m. to 5:30 p.m. To accommodate business needs, employees may be assigned to other workdays and/or hours, including weekends and evenings.ADA tag:&nbsp;To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements and minimum qualifications listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions and/or meet the minimum qualifications.

Savannah College of Art and Design

Professor, Service Design

Dubbed the "Harvard of comics" by Philadelphia Weekly, the SCAD sequential arts program is marked by its comprehensive curriculum integrating traditional techniques with advanced technology and specialized digital applications. As a professor in this program, you will join a faculty that empowers students to explore the discipline's various styles and genres and to create content that spans comic books and strips, graphic novels, video games, film, television, and so much more.In this role, you will model leadership and fulfill teaching assignments as determined by the contact hours listed in the Employment Agreement, including syllabus design, submission, and approval; midterm grade reviews; and availability for office hours, extra help sessions, learning opportunities, and field trips. You will conduct course and program assessments, meet grading and academic documentation requirements, and record attendance for each class per academic policies and regulations. You will also attend on-ground and virtual activities, including admission events, faculty councils, and exhibitions, among others. Additionally, you may be asked to participate in or assist with curriculum assessment and development meetings, accreditation support, institutional effectiveness meetings, and other publicity assignments. &nbsp;Minimum qualifications:   &nbsp;<ul><li>Terminal degree in sequential art or a related discipline  &nbsp;</li><li>Experience in or knowledge of relevant professions</li></ul>Preferred qualifications:  &nbsp;<ul><li>Teaching experience at the collegiate level     &nbsp;</li></ul>Required application documents:&nbsp;<ul><li>Current résumé and/or CV&nbsp;</li><li>Cover letter&nbsp;</li><li>Portfolio or its equivalent&nbsp;</li><li>Unofficial academic transcripts&nbsp;</li></ul>Certificates, licenses, and registrations:     &nbsp;<ul><li>Academic and professional credentials to teach&nbsp;sequential art</li></ul>Travel required:      &nbsp;<ul><li>Less than 10%     &nbsp;</li></ul>Special instructions to applicants: Only complete packages will be considered. An unofficial transcript of your highest degree awarded, a cover letter, and a résumé or CV are required.Work hours: As noted in the Employment Agreement.     &nbsp;   &nbsp;ADA tag: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements and minimum qualifications listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions and/or meet the minimum qualifications.  &nbsp;

Professor, Sequential Art

Senior Systems Analyst As Senior Systems Analyst you are deeply committed to improving the value delivered to our customers. In an agile structure you will collaborate with other squad members, squad lead, chapter lead and business and technology partners in various business units across the firm to help establish the requirements for your squad, influence the strategic decisions and help build solutions for your domain. In this role, you will: <ul> <li>Draw upon your strong systems analysis skills and a demonstrable ability to break down a sophisticated problem or opportunity and offer solutions. </li><li>Demonstrate a global mind-set working and orchestrating across distributed teams and management. </li><li>Work with agile team and planning leads to identify, define and agile tools deployment to ensure work aligns with strategic goals and roadmap. </li><li>Utilize structured, disciplined, and data-oriented process to identify root cause and solve problems across tools. </li><li>Effectively communicate progress to senior team. Participate in executive level presentations for internal or external use as applicable to communicate project and portfolio status and plans. </li><li>Provide systems design/ patterns for multi-tier systems integrations. </li></ul> The Expertise and Skills You Bring <ul> <li>Degree in Technology discipline/Business with strong IT focus </li><li>7+ years of Systems Analysis experience within the IT field, financial services, or related environment </li><li>Experience collaborating in a team environment to develop, deploy, and support key applications and features. </li><li>Strong analytical and problem-solving skills. </li><li>Create and maintain technical documentation, system specifications, and user manuals. </li><li>Hands on experience with database technologies such as SQL and Oracle. </li><li>Experience with REST, SOAP, JSON, XML, </li><li>A proven understanding of the Agile software development methodology </li><li>Excellent written and oral communication skills, allowing you to interview Business partners to understand project objectives, use cases and requirements. </li><li>Ability to understand sophisticated customer needs, translate them into user stories with concrete acceptance criteria, and drive solution formulation with a multi-functional team </li><li>Ability to diagram business processes and system workflows. </li><li>Expertise in conveying technical concepts with internal customers, technical team members, and/or other technical contributors across the organization. </li><li>Look for opportunities to innovate and take thoughtful risks to get work done </li><li>Willingness to actively participate in defining project scope/backlog, while recommending solutions to project issues. </li><li>Provide required technical support to functional team (Product owners, BA) in client onboarding, technical analysis, API testing, etc. triaging system defects in production and non-production environments. </li><li>Desire to understand web and mobile applications, while having the confidence to clearly communicate technical concepts to the partners. </li><li>Ability to learn quickly, adapt and thrive to meet the needs of a fast-paced and evolving environment. </li></ul> Your experience with the following will be a plus: <ul> <li>Proficiency in programming languages such as Java, C#, Python, JavaScript, and SQL. </li><li>Knowledge of front-end technologies like HTML, CSS, and frameworks such as Angular, React, or Vue.js. </li><li>Knowledge of cloud computing platforms (e.g., AWS, Azure, Google Cloud) and related services. </li><li>Ability to perform technical analysis of sophisticated Web application development concepts (Spring MVC, Spring Core, XML, CSS, etc.) </li><li>Working understanding of QA automation </li></ul> The Team Fidelity's Workplace Solutions (WS) Digital Platforms Technology team designs, develops, implements, and supports WS’s suite of Digital products and services. The Digital Platforms development team focuses on delivering innovative solutions which meet the needs of our customers. Our systems professionals thrive, with a steadfast dedication to innovation, which fosters a culture of continuous improvement and significant achievement. We see ourselves as a vital link to Fidelity's customers. This is a fast-paced group that is using ground-breaking technologies to build powerful tools and outstanding user experiences for our customers, using Java-based technologies.

Fidelity TalentSource

Systems Analyst

The Purpose of your role You will serve as a Full Stack Software Engineer who will play a key role on a Scrum team and within Digital Platforms Technology. You will work closely with the Squad Lead, Scrum Master, Systems Analyst, Quality Assurance, Architects and other Developers, to craft, build, test, and deliver the features that make up Fidelity’s Digital experiences. The Skills you bring <ul> <li>Experience collaborating in a team environment to develop, deploy, and support key applications and features</li> <li>A proven understanding of the Agile software development methodology</li> <li>Extensive experience decomposing sophisticated business problems into creative, efficient, and scalable solutions</li> <li>Proficiency with server-side/mid-tier languages, frameworks, libraries, and related technologies: Java EE, Apache Tomcat, Spring MVC/Spring Boot, Logback, SLF4j, Maven</li> <li>Client-side language, library, and framework proficiency: Angular (latest versions), JavaScript/TypeScript, Node, NPM, HTML/CSS, RxJS</li> <li>Appreciation for and alignment to standard methodologies regarding object-oriented design, coding standards, RESTful service consumption and integration, common design patterns, secure application development, and test coverage</li> <li>DevOps concepts governing SCM, continuous integration, monitoring, and deployment processes</li> <li>Enterprise application architecture patterns and orchestration frameworks such as Apache Camel</li> <li>Client-side unit testing frameworks and test runners like Jasmine and Karma</li> <li>Docker containerization and AWS cloud deployment and application management via the AWS console</li> <li>AWS certification(s)</li> <li>The W3C’s Web Content Accessibility Guidelines and their implementation</li> </ul> The Value you deliver <ul> <li>Extensive knowledge of internet based technologies, application architecture, as well as current and emerging technologies</li> <li>Full grasp of the software development process including analysis, design, coding, system and user testing, problem resolution and planning</li> <li>Use of formal methods (traditional structured or Agile/iterative) for delivering new or enhanced applications, identify and communicating systems development processes and developing work you're doing associated with the respective phases of the lifecycle</li> <li>Ability to work with a variety of individuals and groups, both in person and virtually, in a constructive and collaborative manner</li> <li>Strong analytical skills and ability to tackle issues and work through ambiguous situations by making timely decisions based on facts, knowledge, experience and judgment</li> <li>Can communicate in various settings; one-on-one, small and large groups, with peers, and senior management</li> <li>Skilled at influencing team members and external groups</li> <li>Proactively navigates the organization in order to accomplish tasks</li> <li>Willingness to work on multiple efforts simultaneously</li> <li>Strong troubleshooting and problem-solving skills</li> <li>Desire to be organized, highly responsive and committed to quality</li> </ul> How your work impacts the Organization Our goal within Digital Platforms is to build a user experience that delights our customers, anticipates their needs and matches services or solutions to support effective decision making. Responsible for delivering new products and services that will greatly improve the digital experience for our Workplace Solutions customers! Company Culture At Fidelity, you can find it all here. We reward ambitious, passionate individuals with a work environment that furthers diversity, partnership and collaboration as well as encourages innovative ideas and fresh thinking. We recognize the value that employees’ individual differences can give to the forward-thinking and strong future of our company.

1,484 Education / Training Jobs